What Safety Products Does Palmer Safety Make?

May 14th 2026

Fall Protection & Jobsite Safety Guide

A practical guide to Palmer Safety harnesses, lanyards, SRLs, lifelines, anchors, fall protection kits, and jobsite safety equipment available from Bishop Lifting.

Palmer Safety manufactures professional fall protection and jobsite safety products for workers who operate at height. Their equipment is commonly used by construction crews, roofers, industrial maintenance teams, utility workers, contractors, and safety managers who need dependable fall protection gear for demanding work environments.

At Bishop Lifting, Palmer Safety products are represented across major fall protection categories, including full-body harnesses, shock-absorbing lanyards, self-retracting lifelines, horizontal lifeline systems, vertical lifelines, rope grabs, anchors, and fall protection kits.

Important Safety Note:

Fall protection equipment must be selected, installed, inspected, and used according to the manufacturer’s instructions and applicable OSHA, ANSI, and jobsite requirements. Always confirm that each component is compatible with the complete fall protection system before use.

Quick Answer: What Does Palmer Safety Make?

Full-body harnesses for fall arrest, positioning, and elevated work applications.
Lanyards for connecting a worker’s harness to an approved anchorage or lifeline system.
Self-retracting lifelines for fall arrest with increased mobility and reduced slack.
Horizontal lifeline systems for crews that need continuous tie-off across a work span.
Vertical lifelines and rope grabs for roofing, ladder, scaffolding, and vertical access work.
Anchors and anchorage connectors for creating compatible tie-off points.
Fall protection kits that bundle compatible components for common jobsite applications.

Palmer Safety Fall Protection Equipment

Palmer Safety is best known for fall protection equipment designed for workers at height. This includes harnesses, lanyards, SRLs, lifelines, anchors, and kits that help contractors and safety teams build practical fall protection systems for real jobsite conditions.

Instead of treating fall protection as a single product, Palmer Safety offers multiple components that work together as a complete system: body support, anchorage, connectors, lifelines, and rescue or retrieval planning where required.

Shop Palmer Safety

Browse Palmer Safety fall protection and PPE gear, including harnesses, lanyards, SRLs, anchors, lifelines, and jobsite safety equipment. This is the best starting point for buyers who want to compare Palmer products available from Bishop Lifting.

Browse Palmer Safety Products

Shop All Fall Protection

Explore Bishop Lifting’s complete fall protection selection, including harnesses, SRLs, lanyards, anchors, rescue equipment, horizontal lifelines, vertical lifelines, and fall protection kits for working at height.

Browse Fall Protection Gear

1. Palmer Safety Full-Body Harnesses

A full-body harness is the central piece of most personal fall arrest systems. Palmer Safety harnesses are designed to help distribute fall forces across the body while giving workers the fit, adjustment, and mobility needed for elevated work.

Depending on the application, buyers may need a basic construction harness, a harness with additional D-rings, a positioning harness, a tower-style harness, or a premium harness designed for longer wear times. The right choice depends on the worker’s task, attachment points, fall clearance, comfort needs, and jobsite requirements.

Shop Fall Protection Harnesses

Find full-body harnesses for construction, industrial maintenance, roofing, utilities, and general work-at-height applications. This category is ideal for buyers comparing fit, D-ring configuration, buckle style, and comfort features.

Browse Safety Harnesses

Related Guide

Need help understanding harness requirements? Review Bishop Lifting’s guide to OSHA standards for fall protection harnesses.

Read: What Are the OSHA Standards for Fall Protection Harnesses?

2. Palmer Safety Lanyards

Lanyards connect a worker’s harness to an approved anchorage point, lifeline, or compatible connector. Palmer Safety lanyards may be used in fall arrest, restraint, or positioning applications depending on the product design and jobsite setup.

Common lanyard options include shock-absorbing lanyards, single-leg lanyards, twin-leg lanyards for 100 percent tie-off, and positioning lanyards. Buyers should confirm the required length, hook style, energy absorber, fall clearance, and compatibility with the anchorage and harness.

Shop Fall Protection Lanyards

Browse lanyards for fall arrest, restraint, positioning, and tie-off applications. This category helps crews compare shock-absorbing lanyards, twin-leg options, connector styles, and jobsite-ready configurations.

Browse Fall Protection Lanyards

3. Palmer Safety Self-Retracting Lifelines

Self-retracting lifelines, often called SRLs, help provide fall arrest while allowing a worker to move more freely than a traditional fixed-length lanyard. The lifeline extends and retracts as the worker moves, helping reduce slack in the system.

Palmer Safety SRLs are useful for construction, steel erection, industrial maintenance, leading-edge work where appropriate, and other applications where mobility and fall arrest performance are both important. Always confirm whether the SRL is rated for the specific application, including leading-edge exposure if that hazard is present.

Shop Self-Retracting Lifelines

Find SRLs for work-at-height applications where mobility, fall arrest, and reduced line slack are important. This category includes options for crews comparing length, housing type, hook configuration, and leading-edge suitability.

Browse Self-Retracting Lifelines

4. Palmer Safety Horizontal Lifeline Systems

Horizontal lifeline systems are used when workers need to move across a span while maintaining fall protection. These systems can be helpful for roofing, steel work, bridge work, industrial platforms, and other elevated areas where a single fixed anchor does not provide enough mobility.

A horizontal lifeline system typically requires compatible anchors, connectors, tensioning hardware, and a lifeline designed for the number of workers and the span being covered. Proper installation and inspection are critical because the system must control fall forces across multiple components.

Shop Horizontal Lifeline Systems

Browse horizontal lifeline systems for crews that need continuous tie-off across rooftops, structural steel, platforms, and other elevated work areas. This category is useful for teams that need portable or temporary fall protection over longer spans.

Browse Horizontal Lifeline Systems

Featured Palmer Safety Horizontal Lifeline

The Palmer Safety 100 ft Horizontal Lifeline System is designed for mobile fall protection where workers need to remain tied off while moving along a span. It is a strong product fit for this topic and a useful internal link for buyers ready to compare system options.

View Palmer Safety 100 ft Horizontal Lifeline System

5. Palmer Safety Vertical Lifelines and Rope Grabs

Vertical lifelines and rope grabs are commonly used for roofing, scaffolding, ladder access, and other vertical movement applications. A rope grab travels along the lifeline and helps arrest a fall when properly used as part of a compatible system.

Palmer Safety vertical lifelines can help crews create practical fall protection setups for jobs where a worker moves up, down, or along a sloped surface. Buyers should confirm lifeline length, rope diameter, rope grab compatibility, connector style, anchorage requirements, and fall clearance.

Shop Vertical Lifelines + Grabs

Find vertical lifelines, rope grabs, and related components for roofing, scaffolding, ladder access, and vertical fall protection applications. This category is ideal for crews that need flexible fall protection while moving vertically or along a slope.

Browse Vertical Lifelines + Grabs

Featured Palmer Safety Vertical Lifeline

The Palmer Safety 5/8 inch Vertical Rope Lifeline is a relevant product option for buyers looking for Palmer-branded vertical lifeline equipment for fall arrest setups.

View Palmer Safety Vertical Rope Lifeline

6. Palmer Safety Anchors and Anchorage Connectors

Anchorage is one of the most important parts of any fall protection system. Without a properly selected and installed anchor point, even a high-quality harness, lanyard, or SRL cannot perform as intended.

Palmer Safety anchorage products may include roof anchors, post anchors, cross-arm straps, reusable anchors, and other connectors depending on the application. The correct anchor depends on the structure, substrate, load requirement, direction of loading, and whether the system is temporary or permanent.

Shop Fall Protection Anchors

Browse anchors and anchorage connectors for tying off fall protection systems to approved structures. This category helps buyers compare roof anchors, cross-arm straps, reusable anchors, and other jobsite anchorage solutions.

Browse Fall Protection Anchors

7. Palmer Safety Fall Protection Kits

Fall protection kits are designed to simplify equipment selection by bundling compatible components for common applications. A kit may include a harness, lanyard, rope grab, vertical lifeline, anchor, storage bag, or other job-specific items.

For buyers outfitting roofing crews, temporary work-at-height teams, or contractors who need a ready-to-use setup, a Palmer Safety kit can reduce guesswork and help ensure workers have the basic components they need before arriving on site.

Shop Fall Protection Kits

Browse fall protection kits that combine commonly used components such as harnesses, lanyards, vertical lifelines, rope grabs, and anchors. Kits are a practical option for buyers who want compatible gear packaged for common work-at-height tasks.

Browse Fall Protection Kits

Featured Palmer Safety Roofer’s Kit

The Palmer Safety Roofer’s Kit with 50 ft Lifeline is a relevant option for roofing and elevated work applications where a packaged fall protection setup is preferred.

View Palmer Safety Roofer’s Kit

8. Palmer Safety PPE and Jobsite Safety Gear

In addition to fall protection, Palmer Safety is associated with broader jobsite safety needs. Depending on the product selection available, this may include PPE and accessories used to support safer work environments.

For lifting.com customers, the strongest Palmer Safety fit is fall protection. Buyers who also need general PPE can browse Bishop Lifting’s safety supplies selection for protective gear used across construction, rigging, industrial, and maintenance environments.

Shop Safety Supplies

Explore Bishop Lifting’s broader safety supply selection, including PPE, first aid supplies, fire safety products, and jobsite safety essentials for crews working in industrial, construction, and field environments.

Browse Safety Supplies

How to Choose the Right Palmer Safety Products

Choosing fall protection gear is not just about buying a harness or lanyard. The entire system must match the work environment, worker movement, anchorage, fall clearance, rescue plan, and applicable safety requirements.

Buyer Checklist

Work type: Are workers on rooftops, ladders, scaffolding, steel, lifts, towers, or industrial platforms?
Fall hazard: Is the goal fall arrest, fall restraint, work positioning, rescue, or controlled descent?
Anchor point: Is there a rated anchorage available, and is it compatible with the system?
Connector type: Should the worker use a lanyard, SRL, rope grab, horizontal lifeline, or vertical lifeline?
Fall clearance: Is there enough distance below the worker for the system to arrest a fall safely?
Worker fit: Does the harness fit the worker correctly and support the required movement?
Environment: Will the equipment face sharp edges, heat, chemicals, abrasion, moisture, or confined spaces?
Inspection: Can the crew inspect and document the condition of each component before use?

Is Palmer Safety OSHA Compliant?

Palmer Safety equipment can support OSHA and ANSI fall protection requirements when the correct product is selected, used as directed, inspected properly, and integrated into a compliant fall protection program.

It is important to understand that OSHA does not simply “approve” a brand for every possible jobsite situation. Compliance depends on the full system, including proper product selection, worker training, anchorage, fall clearance, inspection, documentation, and rescue planning.

Related Guide

For a deeper look at Palmer Safety and compliance, read Bishop Lifting’s guide on whether Palmer Safety is OSHA compliant.

Read: Is Palmer Safety OSHA Compliant?

Related Guide

Fall protection requirements can be confusing. This guide explains what has changed, what has not, and what employers should consider when building a compliant fall protection program.

Read: What Is the “New” OSHA Standard for Fall Protection?

Related Guide

A complete fall protection system depends on several components working together. This guide explains the four major parts of a fall protection system.

Read: What Are the Four Components of a Fall Protection System?

Inspection Tips for Palmer Safety Fall Protection Gear

Fall protection equipment should be inspected before use and removed from service if damage, excessive wear, missing labels, deformation, corrosion, contamination, or questionable conditions are found. Always follow the manufacturer’s inspection criteria for the specific product.

Inspect harness webbing for cuts, burns, chemical damage, broken fibers, loose stitching, or excessive wear.
Inspect D-rings, buckles, and connectors for cracks, bends, corrosion, sharp edges, or deformation.
Inspect lanyards for torn webbing, damaged shock absorbers, worn labels, or compromised hooks.
Inspect SRLs for smooth extension and retraction, proper locking function, housing damage, and lifeline condition.
Inspect rope lifelines for cuts, abrasion, contamination, knots, swelling, stiffness, or damaged terminations.
Inspect anchors for structural damage, corrosion, loose hardware, deformation, or improper installation.
Document inspections according to your company’s safety program and jobsite requirements.

Need Help Matching Fall Protection Gear to the Job?

Palmer Safety products can be used across many fall protection applications, but the right setup depends on the worker, hazard, anchorage, clearance, movement, and required system type. Bishop Lifting can help buyers compare compatible fall protection options for their jobsite needs.

Shop Palmer Safety Products

Frequently Asked Questions About Palmer Safety Products

What kind of safety products does Palmer Safety make?

Palmer Safety makes fall protection and jobsite safety products, including full-body harnesses, lanyards, self-retracting lifelines, horizontal lifeline systems, vertical lifelines, rope grabs, anchors, and fall protection kits.

Does Palmer Safety make fall protection harnesses?

Yes. Palmer Safety makes full-body harnesses for workers who need fall arrest, restraint, positioning, or elevated work protection. Harness selection should be based on fit, D-ring configuration, buckle type, comfort, and application.

What is a Palmer Safety SRL used for?

A Palmer Safety self-retracting lifeline is used to connect a worker’s harness to an approved anchorage while allowing movement and helping reduce slack in the fall protection system. SRLs are commonly used in construction, industrial, maintenance, and work-at-height applications.

Does Palmer Safety make horizontal lifeline systems?

Yes. Palmer Safety horizontal lifeline systems are available for applications where workers need to stay tied off while moving across a span. These systems are commonly used for roofing, structural work, platforms, and other elevated areas.

Are Palmer Safety products OSHA compliant?

Palmer Safety products can support OSHA and ANSI fall protection requirements when the correct equipment is selected, installed, inspected, and used according to manufacturer instructions and the employer’s fall protection program. Compliance depends on the complete system and how it is used.

Who uses Palmer Safety equipment?

Palmer Safety equipment is used by construction workers, roofers, utility crews, industrial maintenance teams, contractors, safety managers, and other professionals who work at height or need jobsite fall protection equipment.

What should I check before buying Palmer Safety fall protection gear?

Before buying, confirm the work application, anchorage, fall clearance, connector type, worker fit, inspection requirements, and compatibility between all components. Fall protection equipment should be selected as a complete system, not as isolated parts.

Shop Palmer Safety Fall Protection at Bishop Lifting

From harnesses and lanyards to SRLs, anchors, lifelines, and complete fall protection kits, Bishop Lifting offers Palmer Safety products for crews working at height in construction, industrial, roofing, utility, and maintenance environments.

Shop Palmer Safety Shop Fall Protection Shop Fall Protection Kits