Crosby 3/8" G-209A Alloy Screw Pin Anchor Shackle - 2 Ton WLL - #1017450

Crosby G-209A Alloy Screw Pin Anchor Shackles – Grade 8 Performance for Critical Rigging

The Crosby G-209A Alloy Screw Pin Anchor Shackles are engineered for superior strength, reliability, and traceability in heavy-duty rigging applications. These shackles are forged from quenched and tempered alloy steel with alloy pins and meet the demanding performance requirements of Grade 8 shackles. With sizes ranging from 3/8" up to 1-3/8" and Working Load Limits from 2 tons to 21 tons, the G-209A series is hot-dip galvanized for corrosion resistance, with the 3/8" size mechanically galvanized. Designed for use in extreme environments, they are approved for temperatures ranging from -40°F to 400°F and meet or exceed ASME B30.26 standards. Each shackle is permanently marked with its Working Load Limit. While not factory proof tested, G-209A shackles can be proof tested and certified to standards such as ABS, DNV, or Lloyd’s upon request at the time of order. With a 5:1 design factor and Crosby’s trusted Red Pin® quality, these shackles are a dependable solution for demanding jobsite conditions.

Key Features

• Forged Alloy Steel: Quenched and tempered construction with alloy pins for maximum strength and impact resistance.
• Screw Pin Design: Easy to install and remove, ideal for pick-and-place or temporary applications.
• Corrosion Resistant: Hot-dip galvanized finish (mechanically galvanized for 3/8" size) for durability in outdoor and marine environments.
• Permanent Load Markings: Working Load Limit is stamped on each shackle for clear, consistent identification.
• Temperature Rated: Safe for use in extreme conditions from -40°F to 400°F (-40°C to 204°C).
• Meets Critical Standards: Conforms to ASME B30.26, Federal Spec RR-C-271H Type IVA, Grade B, Class 2, and meets Grade 8 performance requirements.
• Optional Certification: Proof load testing, magnetic particle inspection, and certification to ABS, DNV, Lloyd’s, or other standards are available upon request.

Specifications

• Material: Forged Alloy Steel, Quenched and Tempered
• Finish: Hot-Dip Galvanized (3/8" size is mechanically galvanized)
• Design Factor: 5:1
• Proof Load Guidelines: 2x WLL (metric tons), 2.2x WLL (short tons)
• Factory Testing: Shackles are not proof tested by default
• Size Range: 3/8" to 1-3/8"
• Working Load Limit (WLL): 2 tons to 21 tons
• Temperature Rating: -40°F to 400°F (-40°C to 204°C)

Note: Proof testing and certification must be requested at the time of order. Additional charges apply for testing, inspection, and documentation.