Product Description
5 Gallon Type I Steel Safety Can for Diesel — Justrite 7150200 (Yellow)
Overview: The Justrite 7150200 is a Type I steel safety can designed for diesel fuel storage and handling. It features a single spout for both filling and pouring, a self-closing, leak-tight lid, and a stainless steel flame arrester to help control vapors, prevent flashback ignition, and reduce spill risk.
Why It’s Safer: The sealed lid includes automatic positive-pressure relief that vents between 3–5 psig to guard against rupture or explosion. The integrated stainless steel flame arrester dissipates heat to stop flashback. Built from high-grade, powder-coated steel and tested to ensure 100% leakproof performance.
Compliance & Approvals: Meets OSHA and NFPA 30 requirements; FM, UL/ULC, and TÜV approved. CARB compliant and meets California CAL/OSHA requirements (CCR Title 8 §1930(a)(1)); exempt under CCR Title 13 §2467.3(c).
Key Features:
- Color-coded yellow for diesel fuel to help prevent cross-contamination
- Type I design (single spout) for straightforward fill & pour
- Self-closing lid minimizes spills and vapor release
- Auto-venting to relieve internal pressure (3–5 psig)
- Stainless steel flame arrester prevents flashback
- Chemical-resistant, durable powder-coat finish
- Ergonomic swinging handle for safe transport of heavier loads
Specifications:
- Capacity: 5 gal (19 L)
- Material: Steel (powder-coated)
- Color: Yellow
- Exterior Dimensions: 16.875" H × 11.75" OD (429 × 298 mm)
- Fill/Pour Opening: 1.58" (40 mm)
- Net Weight: 6.2 lb (2.8 kg)
- Approvals: FM, UL, ULC, TÜV; Standards: OSHA, NFPA 30; CARB compliant
Recommended Accessory: For clean pouring into small openings, use the Justrite plastic funnel #11202Y (sold separately).
Specifications
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.