Product Description
The 12" Roof Anchor with Baseplate is designed for permanent installation and provides a secure, fixed connection point for fall protection systems. Ideal for both residential and commercial applications, it offers compatibility with horizontal lifeline (HLL) systems and is suitable for single-point tie-off or as an HLL endpoint.
Key Features
- Permanent Anchor Point: Extends through roofing for accessibility both during and after construction.
- Versatile Installation: Compatible with wood, steel, and concrete substrates.
- Horizontal Lifeline Compatibility: Suitable for use as an HLL endpoint.
- Galvanized Steel Construction: Durable and corrosion-resistant finish ensures long-lasting performance.
- Baseplate Design: 1/2-inch thick, 16" x 16" baseplate with 8 holes for 1/2" bolts and 40 holes for #14 screws, ensuring a secure and reliable installation.
- Back Plate Option: Allows for installation on I-beams or other structural members (sold separately).
Technical Specifications
- Material: Galvanized Steel
- Dimensions:
- Post Height: 12 inches (305 mm)
- Baseplate Dimensions: 16" x 16" (406.4 mm x 406.4 mm)
- Baseplate Thickness: 1/2 inch
- Capacity: Supports workers from 130 to 420 lbs
- Minimum Breaking Strength (MBS): 5,000 lbs
- Compliance: Meets or exceeds OSHA 1926 Subpart M & 1910 and ANSI Z359.18-2017 & A10.32-2012 standards
- Service Temperature: Minimum -30°F
With its robust construction and compliance with industry safety standards, the 12" Roof Anchor with Baseplate is a reliable solution for permanent fall protection installations on various substrates.
Specifications
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.