Product Description
The Lad-Saf X3 Detachable Cable Sleeve exclusively for 3/8" (9.5mm) cable, with dual independent locking systems, is part of a permanently installed ladder safety system. It is designed to work with many different styles and lengths of ladders on structures like wind turbines, communication towers, buildings, water towers and more.
Easy to Climb The Lad-Saf X3 Detachable Cable Sleeve is a portable connection device that connects the worker's harness to the ladder cable and glides freely up and down the cable as the worker climbs. Once attached, the sleeve does not require any further handling by the climber and allows the climber to move up and down the entire length of the ladder safety system with ease and confidence.
Easy to Install and Detach The Lad-Saf X3 is designed for one-handed attachment and detachment anywhere along the cable.
Dual Independent Locking System In the event of a fall, the sleeve is designed to lock onto the cable and arrest the fall, and to remain locked until the worker can regain his footing or be rescued. Even if one of the two independent means of locking is compromised, the second means of locking will still engage to arrest the fall.
Integrated Energy Absorber/Fall Indicator The integrated energy absorber reduces the maximum fall arrest force. In the event of a fall this absorber also acts as a fall indicator, showing the device has been deployed and needs to be taken out of service.
Compact and Corrosion Resistant The Lad-Saf X3's compact and lightweight design has stainless steel construction to stand up to harsh environments.
- For use on 3/8" (9.5mm) 1x7 or 7x19 solid core steel cable
- Mobile design follows user for convenient climbing protection
- Easy to install and detach anywhere along lifeline
- Mechanical and inertial locking system stops falls within inches
- Built-in energy absorber and fall indicator
- Extremely rugged and corrosion resistant construction
- Extremely compact, lightweight design
- Worker Weight Capacity: 310 lbs
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
