DBI Sala Lad-Saf X2 Cable Grab

On Sale

DBI Sala Lad-Saf X2 Cable Grab

SKU:: DBI-6160030

Made in the United States of America!

This product usually ships out in just 1 - 2 days.

Earn
rewards points.

CA Prop 65

This product may expose you to substances that are known to the State of California to cause cancer or reproductive harm. - https://www.P65warnings.ca.gov

$706.86 Sale

Regular $785.40

Current Stock:

Quantity:

Description
Specifications
Attachments
Safety Notice
Reviews
Q&A

Product Description

Every day, workers around the world climb ladders to great heights to get their job done. Working at height is hazardous and requires constant attention to safety. A fall can happen at any time and on any structure during the climb going up or down.

Part of a permanently installed ladder safety system, the Lad-Saf X2 Detachable Cable Sleeve with dual independent locking systems is a portable connection device that connects the worker's harness to the ladder cable and glides freely up or down the cable as the worker climbs. Once attached, the sleeve does not require any further handling by the climber. It is designed to work with many different styles and lengths of ladders on structures like wind turbines, communication towers, buildings, water towers and more.

Easy to Climb
Automatically follows the climber during ascent or descent.

Easy to Install and Detach
One-handed attachment or removal from the cable delivers fast, easy and safe connections. Can be attached anywhere along the cable for added versatility.

Dual Independent Locking System
In the event of a fall, the sleeve is designed to lock onto the cable and arrest the fall, and to remain locked until the worker can regain his footing or be rescued. Even if one of the two independent means of locking is compromised, the second means of locking will still engage to arrest the fall.

Integrated Energy Absorber/Fall Indicator
Deploys in the event of a fall, limits the maximum fall arrest force to 1,350 lbs (6 kN) or less, and shows the device must be taken out of service.

Compact and Corrosion Resistant
Compact and lightweight stainless steel construction stands up to harsh environments.

For use on 3/8" (9.5mm) and 5/16" (8mm) 1x7 or 7x19 solid core steel cable
Mobile design follows user for convenient climbing protection
Easy to install and detach anywhere along lifeline
Mechanical and inertial locking system stops falls within inches
Built-in energy absorber and fall indicator
Anti-inversion feature prevents incorrect installation
Designed to be compact, rugged and corrosion-resistant
Worker Weight Capacity: 310 lbs

View AllClose

Specifications

MPN

6160030

Size

5" x 6"

Cable Diameter

5/16" - 3/8"

Type

Cable

Material

Stainless Steel

Approx. Weight (lbs)

2.5

View AllClose

Attachments

Safety Notice

Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.

View AllClose