Product Description
The GRIGRI is a belay device with assisted braking designed for belaying both in the gym and at the crag. Compact and lightweight, it can be used with single ropes from 8.5 to 11 mm. The assisted braking function makes belaying more convenient when holding a climber or catching a fall. The design of the handled camming mechanism enables exceptional descent control.
- Belay device with assisted braking, compatible with a broad range of single rope diameters, for both gym and crag
- Feeding slack and catching falls are done using standard belay techniques; always keep a hand on the brake side of the rope
- Belaying convenience, thanks to assisted braking--when a climber falls, the device pivots on the carabiner, the rope tightens and the cam pinches and brakes the rope. Holding the brake side of the rope helps engage the cam; therefore, it is important to always hold the brake side of the rope
- Compatible with dynamic single ropes 8.5 to 11 mm, optimized for 8.9 to 10.5 mm (rope installation diagram engraved on both the interior and exterior of the device)
- Exceptional convenience when lowering--the ergonomic handle allows you to easily unblock the rope and lower someone
- Easily controlled, progressive rope feed provides a smooth and comfortable descent
- Simple to use for belaying both lead or top-rope climbers
- Certification(s): CE EN 15151-1, UIAA
Specifications
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
Product Reviews
- Highest to Lowest
- Newest to Oldest
- Favorite Reviews
- All Ratings
- 5 ★ Reviews
- 4 ★ Reviews
- 3 ★ Reviews
- 2 ★ Reviews
- 1 ★ Reviews

