Ropemaster
Ropemaster 110RA Half Side Rigging Block - 8 Ton WLL
Made in the United States of America!
This product is rated for overhead lifting.
Need it fast? We stock many items, but some rigging and safety gear has longer lead times. Contact us before placing urgent orders.
Earn rewards points.
CA Prop 65
Product Description
Ropemaster 110RA Half-Sided Block – 10" Manganese Sheave
The Ropemaster 110RA Half-Sided Block is built for larger capacity rigging where strength and durability are essential. Outfitted with a 10" work-hardening manganese steel sheave and Timken tapered roller bearings, it provides extended service life and smooth high-load performance. Designed for 1/2" to 5/8" wire rope, the 110RA is rated for an 8-ton working load limit and features a half-sided frame to minimize overall weight without sacrificing ruggedness.
Key Features:
- 10" manganese steel sheave ensures maximum wear resistance
- Timken tapered roller bearings extend life and improve performance
- Half-side construction reduces weight while retaining strength
- Recessed sheave protects wire rope from binding against block sides
- Quick-release draw pin for fast reeving and attachment changes
- Durable cast alloy steel sides for tough rigging environments
- Meets ASME B30.26-1 standards
Specifications:
| Sheave Diameter | 10" |
|---|---|
| Wire Rope Range | 1/2" – 5/8" |
| Working Load Limit | 8 Tons |
| Weight | 38.55 lbs |
| A (Height) | 17.38" |
| B (Thickness) | 5.75" |
| C (Width) | 10.5" |
| D (Throat Bottom) | 1.38" |
| E (Inside Throat Width) | 2.56" |
| F (Yoke Width Above) | 2.56" |
| H (Throat Height Below) | 3.25" |
| J (Throat Height Above) | 2.5" |
| K (Yoke Bar Height) | 1.25" |
| L (Yoke Bar Width) | 1.25" |
Specifications
Related Items
Related Products
Ropemaster
Ropemaster 108RA Half Side Rigging Block - 8 Ton WLL
Ropemaster
Ropemaster 515A Half Side Haulback Block - 15 Ton WLL
Ropemaster
Ropemaster 513A Half Side Haulback Block - 15 Ton WLL
Skookum
Skookum A-8 Half Side Rigging Block - 8 Ton WLL
Skookum
Skookum A-10 Half Side Rigging Block - 8 Ton WLL
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.