UltraTech
UltraTech Ultra-Containment Berm Economy Model - CP2000 - 10 ft x 10 ft x 1 ft
UltraTech
UltraTech Ultra-Containment Berm Economy Model - CP2000 - 10 ft x 10 ft x 1 ft
- SKU:
- UTC-8252
Made in the United States of America!
Need it fast? We stock many items, but some rigging and safety gear has longer lead times. Contact us before placing urgent orders.
Earn rewards points.
CA Prop 65
Product Description
UltraTech Ultra-Containment Berm – Economy Model
The Ultra-Containment Berm Economy Model is a cost-effective secondary containment solution designed for drums, totes, frac tanks, and large equipment. Its frame-free design maximizes usable floor space, making it ideal for indoor or outdoor applications where footprint efficiency matters.
Key Features & Performance
- No external frames or excess material outside sidewalls
- Economical containment for large containers and equipment
- Standard 12 in. wall height across all models
- Constructed from durable Copolymer 2000™ material
- Hydrostatic resistance: 300 psi (minimum)
- Puncture resistance: 50 lbs (typical)
- Meets EPA SPCC and 40 CFR 264.175 requirements
For use on concrete or other hard surfaces, we strongly recommend placing a ground tarp beneath the berm to protect against abrasion and punctures from below. When tracked or wheeled equipment is used, adding track belts inside the berm helps distribute weight and significantly extend the life of the containment system.
If your application involves frequent drive-in/drive-out traffic, a more durable containment berm model may be better suited for higher-cycle access.
Available Sizes & Specifications
| Model No. | Footprint (ft) | Wall Height (in.) | Containment Capacity (gal) | Weight (lbs) |
|---|---|---|---|---|
| 8250 | 4 x 6 | 12 | 179 | 21 |
| 8251 | 6 x 6 | 12 | 269 | 26 |
| 8252 | 10 x 10 | 12 | 748 | 52 |
| 8270 | 10 x 20 | 12 | 1,496 | 88 |
| 8271 | 10 x 30 | 12 | 2,244 | 124 |
| 8272 | 10 x 40 | 12 | 2,992 | 160 |
| 8273 | 10 x 50 | 12 | 3,740 | 196 |
| 8274 | 12 x 12 | 12 | 1,077 | 69 |
| 8275 | 12 x 20 | 12 | 1,795 | 102 |
| 8276 | 12 x 30 | 12 | 2,692 | 144 |
| 8277 | 12 x 40 | 12 | 3,590 | 185 |
| 8278 | 12 x 50 | 12 | 4,488 | 227 |
| 8253 | 12 x 60 | 12 | 5,385 | 268 |
| 8279 | 15 x 15 | 12 | 1,683 | 95 |
| 8280 | 15 x 20 | 12 | 2,244 | 118 |
| 8281 | 15 x 30 | 12 | 3,366 | 165 |
| 8282 | 15 x 40 | 12 | 4,488 | 212 |
| 8254 | 15 x 50 | 12 | 5,610 | 259 |
| 8255 | 15 x 66 | 12 | 7,405 | 334 |
Typical Applications
- Secondary containment for drums, totes, and frac tanks
- Temporary spill containment during maintenance or fueling
- Indoor or outdoor use on concrete with protective accessories
Specifications
Attachments
Related Items
Related Products
UltraTech
UltraTech Ultra-Containment Berm Economy Model - CP2000 - 10 ft x 40 ft x 1 ft
UltraTech
UltraTech Ultra-Containment Berm Economy Model - CP2000 - 10 ft x 50 ft x 1 ft
UltraTech
UltraTech Ultra-Containment Berm Economy Model - CP2000 -10 ft x 20 ft x 1 ft
UltraTech
UltraTech Ultra-Containment Berm Economy Model - CP2000 - 10 ft x 30 ft x 1 ft
UltraTech
UltraTech Ultra-Containment Berm Compact Model - CP2000 - 10 ft x 10 ft x 1 ft
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.