Product Description
The TU series of Griphoist / Tirfor machines are in use all around the world, performing daily operations on construction sites for lifting and pulling. Only the TU models are UL classified.
How They WorkThe way a Griphoist / Tirfor unit works can be described as "hand-to-hand", like the way a sailor pulls on a rope...while one hand pulls the other changes position to pull in turn. They two hands in this metaphor represent the two jaws of the Griphoist / Tirfor. They grip the wire rope without damaging it, and alternately pull it during forward operation and hold it during reverse operation. The effort is transferred to the jaws by two levers: one for forward operation and the other for reverse operation. The load is held securely at all times. Without a ratchet or pawl, loads can be precisely positioned.
Product HighlightsThese machines are safe, reliable and efficient, and are suitable for many applications. Griphoist / Tirfor machines are simply lever-operated units that utilize a separate piece of wire rope (note: the wire rope used by these units is NOT standard production wire rope, rather it has a special construction made to work specifically with Griphoist / Tirfor units). Offering one-man operation, using a telescopic operating handle, they can work in any position and over any height of lift. They can indeed replace typical hoists and winches in many applications.
- Versatile--works in any position, horizontal or vertical and angled
- Length--unlimited length of wire rope is possible (aside from the standard lengths that ship with each unit, custom wire rope assemblies can be ordered)
- Smooth--continuous operation without jerking the load
- Strong--high mechanical advantage
- Safe & Reliable--whether lifting or lowering, the load is permanently controlled with total precision
- No Overloads--overloading is prevented thanks to a built-in safety device
- Man Rated--the TU series is approved for man-riding operations
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
