Product Description
Shock-absorbing tool lanyard with locking carabiner on both ends: Designed and tested to prevent falling objects and reduce the force your body sees if a drop occurs by absorbing the energy transmitted through the tool lanyard. By reducing the shock load this design prevents the tool from pulling the user down with it protecting those above as well as those below.
- Shock-absorbing properties reduce the dynamic force on the body or other anchor point if drop occurs
- Durable 1680-denier polyester elastic blended webbing extends from 38" - 70"
- Low-profile lightweight design reduces snag hazards and added weight
- Anodized aluminum alloy carabiners with double action locking gate and inherent captive eye--ergonomic and designed for easily gripping and handling with gloves
- High-strength 3-ply nylon stitching secures connecting ends
- Single length construction eliminates weak points seen with multi-component lanyards
- Third party certified to a 15 lbs maximum capacity with a 2:1 safety factor
Specifications
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.