Westechrigging.com is now Lifting.com Learn More
Westechrigging.com is now Lifting.com Learn More
Image shown may be a stock photo and is for reference only.
Image shown may be a stock photo and is for reference only.
ISC Progress Capture Pulleys can be used vertically, for lifting and lowering applications and horizontally, for line tensioning. Available in both single or double sheave models. The cam is used to capture progress and prevent dropping of the load while hauling, but can be opened and captivated to allow for smooth lowering. The ISC Progress Capture Pulley features a new lightweight center plate, re-positioned wheel to reduce rope friction and a rated becket, through which most carabiners can be fully rotated. The RP702 is fitted with tamper-proof rivets and is individually serial numbered. The cam-face is coned to minimize rope wear.
Directional Felling
For our forestry customers using capstan winches, one of the questions we get quite often is how does one hold tension on a tree to control the felling direction? Well, this device works perfectly to do exactly that. Check out the video to see it in action, and also how to set it up from the very beginning.
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
