Crosby IP
Crosby IP IPU10/A 2 Ton Lifting Clamp - #2701629
Made in The Netherlands.
We are an Authorized Crosby Distributor.
This product is rated for overhead lifting.
This product may have an extended lead time. Please contact us for an approximate delivery date.
Earn rewards points.
CA Prop 65
Product Description
The IPU10/A automatically "clicks" onto the material as soon as the clamp is placed on the plate. The fact that the safety lock remains in position as the clamp closes precludes hazardous situations, eliminating the need for ladders or other potentially unsafe devices. Fastening the IPU10/A clamp in places that are difficult to reach is no problem.
- For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loading
- Welded alloy steel body for strength and a small frame size
- Forged alloy components where it matters most
- Individually proof-tested at 2 times the Working Load Limit with certificationserial number and test date stamped into body
- Full 180º turning range for material transfer, turning or moving
- Latch locks clamp either open or closed
- Repair kits available
- RFID equipped for complete, modern traceability
Specifications
Attachments
![](https://cdn11.bigcommerce.com/s-11cqjpjngs/content/files/pdf-crosby-ipu10a.png?t=1649090402&")
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
Q&A
Related Products
Crosby IP
Crosby IP IPU10S 2 Ton Lifting Clamp - #2702277
Crosby IP
Crosby IP IPU10 2 Ton Lifting Clamp - #2701677
Crosby IP
Crosby IP IPU10 1/2 Ton Lifting Clamp - #2701675
Crosby IP
Crosby IP IPU10S 1/2 Ton Lifting Clamp - #2702275
Crosby IP
Crosby IP IPU10 9 Ton Lifting Clamp - #2701671
Crosby IP
Crosby IP IPU10/A 1 Ton Lifting Clamp - #2701628
Crosby IP
Crosby IP IPU10S 9 Ton Lifting Clamp - #2702271
Crosby IP
Crosby IP IPU10S 6 Ton Lifting Clamp - #2702269
Crosby IP