Product Description
While not as popular as they used to be, two-in-one lanyards are still very effective. They allow you to pass an obstacle in a tree (or tower) without having to unclip, and without requiring a secondary lanyard. While tied in, you simply grab the free end of the lanyard, pass it over or around the obstacle and connect back to your harness or saddle. Once fully reconnected and well positioned, you can unhook the free end (previously the engaged end). The prusik provides simple and smooth adjustment, even more so than with a mechanical device. If you're unsure of how to use such a lanyard, just check out YouTube, there are some great videos.
- Professionally spliced from durable 3-strand polyester rope
- 20" prusik runner with alloy steel snap hook makes for quick and easy adjustment
- Allows you to work around obstacles while staying tied in
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.