Lewis
Lewis 48" LSG-O Splicing Grip for 1" - 1-1/2" Cable - 3500 lbs WLL
Made in the United States of America!
Earn Rewards with Loyal Lifter's Club
Product Description
Lewis LSG-O Splicing Grips – Open-Ended Heavy-Duty Snake Grips
The Lewis LSG-O Model Splicing Grip is a non-rotating, heavy-duty open-ended mesh grip designed specifically for cable replacement and mid-line splicing pulls. Commonly referred to as a “snake grip,” the LSG-O allows the existing cable and new cable to be inserted from opposite ends and secured together at the center using banding and tape (sold separately).
Constructed from high-strength galvanized steel mesh, the grip tightens under load to maintain secure contact across the cable surface. Available in double or triple weave configurations depending on size range, LSG-O grips are engineered for demanding utility, telecom, and electrical cable pulling applications.
Available Models & Specifications
| Part No. | Model | Cable Range | Work Load (lbs) | UTS (lbs) | Weave | Mesh Length |
|---|---|---|---|---|---|---|
| 50-1576 | LSG-O-1/4 / 1/2-24 | 1/4" – 1/2" | 1,200 | 4,400 | Double | 24" |
| 50-1577 | LSG-O-1/2 / 1-24 | 1/2" – 1" | 2,100 | 4,400 | Double | 24" |
| 50-1573 | LSG-O-1/2 / 1-36 | 1/2" – 1" | 2,500 | 7,500 | Double | 36" |
| 50-2394 | LSG-O-1 / 11/2-36 | 1" – 1-1/2" | 3,500 | 10,000 | Triple | 36" |
| 50-1571 | LSG-O-1 / 11/2-48 | 1" – 1-1/2" | 3,500 | 10,000 | Triple | 48" |
Key Features
- Open-ended design for mid-line cable splicing
- Heavy-duty galvanized steel mesh construction
- Available in double and triple weave configurations
- Non-rotating splicing grip design
- Reusable when properly inspected and installed
- Made in the USA
Typical Applications
- Utility cable replacement
- Underground and conduit pulls
- Manhole and vault splicing
- Telecom and electrical installation work
Warning: Read all specifications, usage, and safety instructions before use. Always ensure proper banding and taping during installation. Not intended for lifting personnel or overhead lifting applications.
Specifications
Related Items
Related Products
Lewis
Lewis 36" LSG-O Splicing Grip for 1/2" - 1" Cable - 2500 lbs WLL
Lewis
Lewis 24" LSG-O Splicing Grip for 1/4" - 1/2" Cable - 1200 lbs WLL
Lewis
Lewis LSG Snake Grip for 1" - 1-1/2" Cable - 3500 lbs WLL
Lewis
Lewis LSG Snake Grip for 1/2" - 1" Cable - 2500 lbs WLL
Lewis
Lewis LSG Snake Grip for 1-1/2" - 2" Cable - 4000 lbs WLL
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.