Product Description
- Fast-activating internal inertial brake--smallest SRD on the market with internal inertial brake mechanism
- Glass reinforced polycarbonate housing, impact-resistant over molded side-walls plus a swivel-eye for reduced lifeline leg twisting
- Abrasion-resistant lifeline; twin legs with aluminum rebar hooks for 100% tie-off
- Webbing is cycle-tested to outlast the competition, made from a very tough Dyneema (80%) and polyester (20%) blend
- Integral visual load impact indicators
- Worker Weight Capacity: 310 lbs
- ANSI Z359.14-2012 Class B, OSHA CFR1910.66, OSHA CFR1926.502
Specifications
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.