Product Description
FallTech 770001 – 100' Temporary Horizontal Lifeline System
This complete temporary horizontal lifeline (HLL) system from FallTech is designed to support two users working at height. The 100-foot kit uses a hollow-core polyester rope for strength, flexibility, and ease of handling, and includes everything needed for quick setup on overhead or horizontal applications.
Key Features:
- 100' of 5/8" hollow-core polyester rope – low-stretch, braided 12-strand with thimbled termination
- Complete system – includes tensioner, 2 carabiners, 2 pass-through anchors, and 2 connecting rings
- For two users – OSHA-rated for up to 310 lbs per user (2 max)
- Complies with safety standards: Meets OSHA 1926.502 and 1910.66
Material Specifications:
- Rope: 5/8" braided 12-strand hollow-core polyester – 5,000 lb minimum strength
- Sling Anchors: Polyester webbing with plated alloy steel D-rings – 5,000 lb minimum static strength
- Carabiners: Plated alloy steel – 5,000 lb minimum static strength, 3,600 lb gate strength
- Tensioner & Rings: Plated alloy steel – 5,000 lb minimum static strength
Performance Ratings:
- System Static Strength: 5,000 lbs minimum
- User Capacity: 310 lbs max per user, 2 users max
Ideal for short-term horizontal applications where fast setup and full OSHA compliance are critical. Choose FallTech for dependable fall protection.
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.