Product Description
- SteelGrip® Cable HLL Assembly, no anchors
- 3/8" galvanized steel cable with one-end terminated and thimbled.
- Features 2 stainless steel coil energy absorbers and 2 connecting carabiners
- In-line tension indicator included with 3 galvanized steel shackles
- System also includes wire rope clips and tensioning turnbuckle
- User-supplied end-point anchors required
- 5,000 lb min. static strength
- Max of 2 users @ 310 lbs each
- Cable HLL System meets OSHA 1926.502 and 1910.66 regulations
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.