Crosby
Crosby L-1327 5/8" Grade 100 Eye Sling Hook w/ Latch - 22600 lbs WLL - #1025896
Crosby
Crosby L-1327 5/8" Grade 100 Eye Sling Hook w/ Latch - 22600 lbs WLL - #1025896
- SKU:
- CR-1025896
Product Description
- For use with wire rope
- Suitable for use with Grade 100 and Grade 80 chain
- Working load limit needs to be de-rated to achieve a 5:1 design factor
- Forged alloy steel, Quenched & Tempered
- Each hook has a Product Identification Code (PIC) for material traceability, along with the size and the name Crosby
- 25% stronger than Grade 80
- Eye Sling Hooks incorporate QUIC-CHECK® deformation and angle indicators (for detailed information, see the Crosby Value Added page in the Crosby catalog)
- When secured with the proper cotter pin through the hole in the tip of hook, meets the intent of OSHA Rule 1926.1431(g) and 1926.1501(g) for personnel lifting
- Individually Proof Tested to 2.5 times the Working Load Limit with certification
- Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit
Specifications
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.