Product Description
Campbell Short Leg Structural GX Clamps – Secure Bite on Wide-Flanged Beams
The Campbell Short Leg Structural GX Clamps are engineered for lifting applications where a secure grip on small or wide-flanged beams is essential. Like standard GX clamps, these models are drop-forged, heat-treated, and 100% proof tested for safety and reliability. The shortened leg design improves stability when lifting from horizontal to vertical. Operators should always place the short leg under the plate during these lifts to maximize safety and control.
Key Features
- Drop-forged, heat-treated body and components
- Designed for a strong bite on small or wide-flanged beams
- Rated for vertical and horizontal-to-vertical lifting through 180°
- Short leg design for improved control – place short leg under plate when tipping up
- Pad and cam should be replaced at the same time
- Each clamp is 100% proof tested, with a test certificate provided
- Minimum WLL of at least 10% of the maximum WLL
Available Models
- 6423100 – Grip Range: 1/16” to 5/8”, WLL: 1/2 ton, Weight: 4.25 lbs
- 6423105 – Grip Range: 1/16” to 3/4”, WLL: 1 ton, Weight: 8 lbs
- 6423108 – Grip Range: 1/16” to 7/8”, WLL: 2 ton, Weight: 10 lbs
- 6423110 – Grip Range: 1/16” to 1”, WLL: 3 ton, Weight: 18 lbs
Applications
- Lifting structural steel with wide flanges
- Steel erection and fabrication
- Construction and industrial maintenance
Note: Always place the short leg under the plate when lifting from horizontal to vertical. Replace the pad and cam at the same time for safe operation. Shackles and other rigging hardware are sold separately.
Specifications
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.