Lift-All
Lift-All 2" x 3 ft Type 2 Roughneck Wire Mesh Sling - 10 Gage - 2300 lbs WLL
Lift-All
Lift-All 2" x 3 ft Type 2 Roughneck Wire Mesh Sling - 10 Gage - 2300 lbs WLL
- SKU:
- LFA-2T210X3
Product Description
- Widely used in metalworking shops and steel warehouses where loads are abrasive, hot or tend to cut synthetic materials
- Each sling is proof-tested and permanently stamped with capacity and serial number
- Will grip load firmly without stretching
- Surface area is large and helps to distribute load forces and reduce potential damage
- End fittings are made of zinc-plated alloy steel, mesh is high-tensile galvanized steel
- Use in vertical or basket hitches
Specifications
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.