Product Description
What Kind Of Chain Is This?This is a true security chain, made from square, case-hardened links to resist cutting. Laclede recently changed their heat treating process to make this chain 62-65 HRC. Made from quenched and tempered alloy steel with an electro-galvanized finish for corrosion protection. Laclede calls it "Lockdown Chain" for a good reason, and at 3/8" (10mm) in diameter, this chain is considered by many to be the ideal size.
What About The Lock?A true, high-security padlock made to work with square security chain. Its heavy-duty design will certainly be a deterrent to any potential thief. This beefy padlock weighs almost 2.5 lbs. You may not want to put it in your pocket, but you'll be happy to secure your precious equipment with it. The brass lock body is 3 mm thick and hardened to 50 HRC. The shackle / pin is 0.43" and is nickel-plated. The lock also ships with three single sided keys designed to activate the 5-tumbler design, and the keyhole is protected with anti-drill steel. This lock works with 3/8", 7/16" and 1/2" security chain.
- Square, case-hardened links
- Made from quenched and tempered alloy steel
- Electro-galvanized finish for corrosion protection
- Designed for securing valuables such as construction equipment, trailers, ATVs and water crafts
- Chain Hardness: 62-65 HRC
- Heavy-duty padlock protects the lock pin from being accessed, forcing a potential thief to deal with the hardened security chain
- Lock body is electro-galvanized for corrosion protection, very durable, heavy-duty design
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.