Product Description
Patented design improves on the already ingenious HAAS Ascent System by giving you an additional 18" of bungee in the system for a total of 30".
- Double tube system allows 30" of in-line bungee to be contained within the unit for over 30" of elongation
- Versatile ascent system has zero set up and can be used by multiple users without adjustment
- Snap is tied just above the ascender, extracting out up to 30" to eliminate any set up as well as any "dead spots" in the return action
- Designed to maximize friction reduction with a bungee that terminates at the top of the Velox, travels down the channel to the bottom where it wraps around a sheave with sealed stainless steel bearings inside a machined aluminum block
- Bungee returns up a second channel where it is tied to a snap
- Bungee is replaceable in under five minutes with no tools
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.