Gunnebo
Gunnebo 5/8" SA Bolt Type Chain Shackle - 8.2 Ton WLL
Made in Sweden.
This product is rated for overhead lifting.
This product may have an extended lead time. Please contact us for an approximate delivery date.
Earn rewards points.
CA Prop 65
Product Description
- The SA shackle is a lifting shackle consisting of a U-shaped body, a bolt, a nut and a safety cotter pin
- The SA shackle is designed, manufactured and tested to be a sling component in accordance to EN 1677-1
- Type tests include deformation test, static tensile test and fatigue test
- Gunnebo proof tests each shackle (100% of each lot)
- The SA shackle is marked as follows:
- On the bow: manufacturer identification (GBO or GBO SWE), product name, size and material Grade (8), CE mark, WLL in tons, batch/traceability code
- On the bolt: material Grade (8), batch/traceability code
- Bolt, nut, and cotter pin type shackles like the SA Shackle provide the most secure type of connection. They are suitable for applications where the shackle is installed permanently or semi-permanently with infrequent removal. SA shackles are designed to be sling components and are suitable for use with Grade 80 chain slings of the proper size according to EN 818-4.
- The SA Shackle can also be used in steel wire rope slings and textile slings. It can be used as an end component in slings or lugs. It can also be used as a connecting component in different constructions, provided that the necessary technical calculations have been taken into account, with regards to load and environmental factors.
Specifications
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
Q&A
Related Products
Gunnebo
Gunnebo 1/2" SA Bolt Type Chain Shackle - 5.4 Ton WLL
Columbus McKinnon
CM 1-5/8" Bolt Type Anchor Shackle - 24 Ton WLL
Approved Vendor