DBI Sala
DBI Sala 6ft ShockWave2 Twin-Leg Lanyard w/ Aluminum Rebar Hooks
Made in the United States of America!
Earn Rewards with Loyal Lifter's Club
CA Prop 65
Product Description
3M DBI-SALA ShockWave2 100% Tie-Off Shock Absorbing Lanyard – 6 ft Double-Leg with Rebar Hooks
The 3M DBI-SALA ShockWave2 100% Tie-Off Shock Absorbing Lanyard (1244409) is designed to provide continuous fall protection with enhanced mobility and reduced trip hazards. Featuring a stretchable elastic web design, this double-leg lanyard expands and contracts with the user’s movement—helping minimize snagging, dragging, and fatigue on the job.
Built for demanding industrial environments, this lanyard incorporates an energy-absorbing system that activates during a fall to limit arrest forces to safe levels. The internal design expands under load while maintaining durability through abrasion-resistant webbing and heavy-duty hardware.
Equipped with aluminum rebar hooks for anchorage and snap hooks for harness connection, this lanyard supports 100% tie-off, making it ideal for climbing, transitioning, and working at height across a wide range of industries.
Key Features
- 100% tie-off double-leg design for continuous fall protection
- Stretchable elastic webbing expands and contracts with movement
- Energy-absorbing design limits fall arrest forces
- Automatically contracts to reduce trip, drag, and snag hazards
- Expands to full 6 ft working length when tensioned
- Durable abrasion-resistant webbing for long service life
- Built-in impact indicator for easy inspection after a fall
- Aluminum rebar hooks for secure anchorage connection
- Zinc plated steel snap hooks for harness attachment
- Integrated 3M Connected Safety ID (CSID) for asset tracking
- Designed for construction, utilities, oil & gas, wind, and general industrial use
- Made in the USA
Specifications
| Specification | Value |
|---|---|
| Product Type | Shock Absorbing Lanyard (100% Tie-Off) |
| Series | ShockWave2 |
| Leg Configuration | Double-leg |
| Length | 6 ft (1.83 m) |
| Lanyard Type | Variable / Elastic |
| Material | Elastic webbing |
| Anchor Connection | Rebar hooks (aluminum) |
| Harness Connection | Snap hook (zinc plated steel) |
| Energy Absorber Rating | 6 ft free fall / MAAF 900 lbs |
| Weight Capacity | 130–310 lbs |
| Weight | approximately 5.2 lbs |
| Color | Yellow |
| Standards / Compliance | Meets applicable fall protection requirements (see manufacturer documentation) |
| Country of Origin | USA |
Note: Always verify compatibility with your fall protection system, anchorage, and required clearance distances before use. Refer to manufacturer instructions for proper application and inspection criteria.
Specifications
Attachments
Related Items
Related Products
DBI Sala
DBI Sala 6ft ShockWave2 Twin-Leg Lanyard w/ Steel Rebar Hooks
DBI Sala
DBI Sala 6ft ShockWave2 Shock-Absorbing Lanyard w/ Steel Rebar Hook
DBI Sala
DBI Sala 6ft ShockWave2 Shock-Absorbing Lanyard w/ Snap Hooks
FallTech
FallTech 6ft ElasTech Twin-Leg Web Lanyard w/ Aluminum Rebar Hooks
Palmer Safety
Palmer Safety 6ft Twin-Leg Lanyard w/ Steel Rebar Hooks
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.