Pewag
Pewag PLE/N 6 Weld-on Lifting Point - 2464 lbs WLL
Made in Austria.
This product is rated for overhead lifting.
Need it fast? We stock many items, but some rigging and safety gear has longer lead times. Contact us before placing urgent orders.
Earn rewards points.
CA Prop 65
Product Description
Pewag PLE/N Weld-On D-Ring Lifting Points – Grade 80 Profilift eta
The Pewag PLE/N weld-on D-ring lifting points are designed for permanent attachment to machine frames, fabricated structures, and vehicle bodies where lifting and lashing loads may be applied from virtually any direction. Manufactured from Grade 80 alloy steel, the PLE/N series is approved for both overhead lifting and lashing and is well known for its patented spring-loaded D-ring that holds position for faster, safer rigging.
The integrated spring keeps the ring standing at the desired angle, enabling one-hand hook-up, while the contoured saddle base helps ensure proper alignment during welding—reducing installation time and rework.
Key Features:
- Grade 80 weld-on lifting point approved for overhead lifting and lashing
- Multi-directional loading capability (observe applicable WLL tables)
- Patented spring holds D-ring at the required angle for one-hand rigging
- Unique saddle design promotes correct alignment and easier installation
- Ideal for permanent attachment to machinery, attachments, and truck bodies
Specifications – Pewag PLE/N Weld-On D-Ring Lifting Points
| Model No. | WLL (kg) | WLL (lbs) Single Leg |
D-Ring Material Dia. (in.) | Inside Width (in.) | Inside Length (in.) | Overall Width (in.) | Weight (lbs) |
|---|---|---|---|---|---|---|---|
| PLE/N 6 | 1,120 | 2,464 | 0.43 | 1.57 | 1.65 | 2.44 | 0.68 |
| PLE/N 8 | 2,000 | 4,400 | 0.51 | 1.65 | 1.77 | 2.72 | 0.88 |
| PLE/N 10 | 3,150 | 6,930 | 0.65 | 1.77 | 1.85 | 3.07 | 1.39 |
| PLE/N 13 | 5,300 | 11,660 | 0.86 | 2.16 | 2.09 | 3.90 | 3.22 |
| PLE/N 16 | 8,000 | 17,600 | 0.98 | 2.75 | 2.87 | 4.72 | 5.07 |
| PLE/N 22 | 15,000 | 33,000 | 1.30 | 3.81 | 3.62 | 6.42 | 11.90 |
All dimensions are in inches. Working Load Limits shown are for single-leg vertical lifts (0°). For multi-leg, angled, or asymmetrical lifts, refer to Pewag load charts. Suitable for service temperatures from -20°C to 400°C.
Pro Tip: When used for lashing applications, Pewag specifies a permissible tensile force of LC = 2 × WLL. Lifting points used for lashing should be clearly identified and not reused for overhead lifting.
Specifications
Attachments
Related Items
Related Products
Pewag
Pewag PLE/N 13 Weld-on Lifting Point - 11660 lbs WLL
Pewag
Pewag PLE/N 8 Weld-on Lifting Point - 4400 lbs WLL
Pewag
Pewag PLE/N 10 Weld-on Lifting Point - 6930 lbs WLL
Pewag
Pewag PLE/N 22 Weld-on Lifting Point - 33000 lbs WLL
Pewag
Pewag PLE/N 16 Weld-on Lifting Point - 17600 lbs WLL
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.