Crosby IP
Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464
Made in The Netherlands.
We are an Authorized Crosby Distributor.
This product is rated for overhead lifting.
This product may have an extended lead time. Please contact us for an approximate delivery date.
Earn rewards points.
CA Prop 65
Product Description
The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This series of clamps can be used in the vertical and horizontal moving, transfer and stacking of different types of structural designs, such as I-Beams, H-beams, angles, etc., depending on the application desired.
- Available in capacities of 3/4 - 12 metric tons
- Wide variety of jaw openings available: 0" - 1.56"
- Welded alloy steel body for strength and smaller size
- Forged alloy components, where required
- Individually Proof Tested to 2 times the Working Load Limit with certification
- Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body
- Each product is individually serialized, with the serial number and Proof Load test date stamped on body
- Serial number is included on the test certificate with maintenance and warranty logbook
- Maintenance replacement parts are available
- Manufactured by a ISO 9001 facility
- All sizes are RFID EQUIPPED
Specifications
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
Q&A
Related Products
Crosby IP
Crosby IP IPBHZ 1-1/2 Ton Horizontal Lifting Clamp - #2705462
Crosby IP
Crosby IP IPBHZ 3/4 Ton Horizontal Lifting Clamp - #2705461
Crosby IP
Crosby IP IPBHZ 12 Ton Horizontal Lifting Clamp - #2705467
Crosby IP
Crosby IP IPBHZ 3 Ton Horizontal Lifting Clamp - #2705463
Crosby IP
Crosby IP IPHGUZ 4-1/2 Ton Horizontal Lifting Clamp - #2705457
Crosby IP
Crosby IP IPH10 4-1/2 Ton Horizontal Lifting Clamp - #2703524
Crosby IP
Crosby IP IPH10 1/2 Ton Horizontal Lifting Clamp - #2703297
Crosby IP
Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522
Crosby IP