Pelican Rope
Pelican 7/16" x 150ft w/ Eye Arborist-24 Climbing Rope | 5400 lbs Breaking Strength
Pelican Rope
Pelican 7/16" x 150ft w/ Eye Arborist-24 Climbing Rope | 5400 lbs Breaking Strength
- SKU:
- PEL-716YBX150E
Product Description
Pelican Rope Arborist-24™ 7/16" – 150 ft with Spliced Eye
This pre-cut 150 ft section of Pelican Rope Arborist-24™ 7/16" comes professionally finished with a Tight Spliced Eye (TSE) on one end. Its 24-strand polyester cover and nylon core provide a smooth, lightweight line that runs effortlessly through climbing hardware. Durable, sap-resistant, and easy to handle — it’s ready for daily use right out of the box.
Key Features
- Pre-cut 150 ft rope with tight Spliced Eye (TSE) on one end.
- Smooth-running 24-strand construction for reliable climbing performance.
- Tough polyester cover resists sap and abrasion.
- Lightweight and comfortable in hand.
- High-visibility red color pattern.
Specifications
| Diameter | 7/16" (11 mm) |
|---|---|
| Length | 150 ft (pre-cut) |
| Tensile Strength | 7,000 lb |
| Weight | ~8.4 lbs (based on 5.6 lbs per 100 ft) |
| End Termination | Tight Spliced Eye (TSE) on one end |
Ideal Use
This ready-to-climb rope is ideal for arborists who prefer a lightweight, smooth line with a factory tight splice for quick setup and secure attachment to hardware.
Family Code: 4AR | Made in the USA by Pelican Rope
Specifications
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
