Product Description
5 Gallon Type II Steel Safety Can for Diesel with 1" Metal Hose — Justrite 7250230 (Yellow)
Overview: The Justrite 7250230 is a Type II AccuFlow™ steel safety can designed for safe diesel fuel storage and precise pouring. It features two openings—one for targeted pouring with a flexible metal hose, and one with an ergonomic lift lever for easy filling—plus the patented Safe-Squeeze® trigger for controlled flow.
Why It’s Safer: The sealed lid has automatic positive-pressure relief venting between 3–5 psig to protect against rupture or explosion. A stainless steel flame arrester dissipates heat to prevent flashback ignition. The can is made from high-grade, powder-coated steel, pressure-tested for quality, and resistant to chemicals and tough worksite conditions.
Compliance & Approvals: Meets OSHA and NFPA 30 requirements; FM, UL/ULC, and TÜV approved. CARB compliant and meets California CAL/OSHA requirements (CCR Title 8 §1930(a)(1)); exempt under CCR Title 13 §2467.3(c). Backed by a 10-year warranty.
Key Features:
- Color-coded yellow for diesel fuel to prevent mix-ups
- Type II design with separate fill and pour openings
- AccuFlow™ system with Safe-Squeeze® trigger for precise pouring control
- Flexible 9" (229 mm) metal hose with 1" OD for targeted pouring into small openings
- Ergonomic lift lever opens the self-closing fill spout wide
- Extra capacity for adding two-cycle oil or other additives
- Large label zone for content identification
- Durable powder-coated steel construction resists chemicals and wear
Specifications:
- Capacity: 5 gal (19 L)
- Material: Steel (powder-coated)
- Color: Yellow
- Exterior Dimensions: 17.5" H × 11.75" OD (445 × 298 mm)
- Fill/Pour Opening: 1.68" (43 mm)
- Hose Dimensions: 9" L × 1" OD (229 × 25 mm)
- Net Weight: 8.4 lb (3.8 kg)
- Approvals: FM, UL, ULC, TÜV; Standards: OSHA, NFPA 30; CARB compliant
Specifications
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.