Product Description

Variety Pack of Round Slings for Common Lifts!

Perhaps you're in the market for round slings, but you're not sure what to buy. These could be for shop stock, a new crane, a rigging crew, etc. You know that standard duty slings aren't heavy enough, but you're not sure if you can get away with red vs. blue, etc. And even once you determine the color/capacity, what about the length? That's where this kit comes into play! It features twelve (12) total slings in three different colors--red, white and blue ('Merica!). You get two different lengths per color. This is the perfect heavy-duty kit if you know that your lifts tend to run on the heavy side. Check out the "What's Included" tab for kit details.

Tuffy has combined "flexible" and "grip" to give you Flexi-Grip®, the round sling that lifts many loads most other types of slings can’t. The Flexi-Grip® wraps easily around just about any shape and size and grips the load with ease, hugs it tight (especially in a choker hitch) and lifts with security and flexibility like no other.

Flexi-Grip® roundslings are made in accordance with ASME B30.9 Sling Standard section 9.6.

ALL-POLYESTER CONSTRUCTION

The all-polyester construction of Tuffy Flexi-Grip’s virtually eliminates moisture absorption, rot and mildew for long service life. They feature a relatively low stretch (3% maximum at its rated capacity) and returns to original length. Polyester also offers good resistance to common industrial acids (except concentrated sulfuric acid) and hot bleaching solutions. You can use Flexi-Grip slings in the presence of many common chemicals such as alcohol, dry cleaning solvent, hydrocarbons, halogenated hydrocarbons, ketones, crude oil, lubricating oils, soaps, detergents, seawater and weak alkalis. Never use or allow exposure to temperatures above 194° F (90° C) or below – 40° F (-40° C).

COLOR-CODED BY CAPACITY

Every Flexi-Grip® sling is encased in a color-coded double-layer polyester jacket which protects the internal load-bearing fibers from abrasion and wear while protecting against ultraviolet degradation.

INSPECT YOUR SLINGS REGULARLY

Before each lift (as you would do with any sling), visually inspect your Flexi-Grip® for any damage. Remove sling from service if you see:

• Missing or illegible identification tag.
• Melting, charring, weld spatter, acid or alkali burns.
• Holes, tears, cuts, embedded particles, abrasive wear or snags that expose the sling’s core yarns.
• Fittings that are damaged, stretched, cracked, pitted or distorted in any way.
• Any visual damage causing doubt as to the sling’s strength.
• Sling being loaded beyond its rated capacity.
• Round slings are not designed for turning or shifting loads.
• Failure to follow proper care, use and inspection criteria may result in personal injury.
• Do not exceed rated capacities.