Crosby
Crosby 1/4" G-209 Screw Pin Anchor Shackle - 1/2 Ton WLL - #1018375
Made in France.
We are an Authorized Crosby Distributor.
This product is rated for overhead lifting.
Need it fast? We stock many items, but some rigging and safety gear has longer lead times. Contact us before placing urgent orders.
Earn rewards points.
CA Prop 65
Product Description
Crosby G-209 Screw Pin Anchor Shackles
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin® — a mark of genuine Crosby quality.
Features
- Grade 6 Performance: Meets or exceeds the performance requirements of Grade 6 shackles.
- Forged, Quenched & Tempered: High-strength alloy steel body with alloy screw pin for dependable durability.
- Permanent Identification: Working Load Limit and Grade 6 permanently shown on every shackle.
- Finish Options: Hot-dip galvanized (G) stocked for corrosion resistance; self-colored (S) available by special order.
- Small Sizes: Sizes 3/8 inch and below are mechanically galvanized.
- Fatigue Rated: Tested at 1.5 × WLL for 20 000 cycles to ensure long service life.
- Proof Tested & Certifiable: Shackles can be furnished proof-tested with certificates to ABS, DNV, Lloyds, or other standards. Certification must be requested at time of order (additional charges apply).
- Temperature Rated: Approved for continuous use from −40 °F (−40 °C) to 400 °F (204 °C).
- Optional Charpy Impact Rating: All 209 and 210 series shackles can meet Charpy requirements of 31 ft-lb (42 J) avg. at −4 °F (−20 °C) upon special request.
- Standards Compliance: Meets or exceeds ASME B30.26 requirements.
- Type Approval Available: ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances upon request (certificates may incur extra charges).
- Federal Spec Conformance: G-209 shackles meet Federal Specification RR-C-271H Type IVA, Grade A, Class 2 (except contractor provisions).
- Genuine Crosby Quality: Look for the Red Pin® — your assurance of true Crosby manufacturing integrity.
Specifications
| Nominal Size (in) | WLL (t) | Weight (lb) | A (in) | B (in) | C (in) | D (in) | E (in) | F (in) | G (in) | H (in) | L (in) | M (in) | P (in) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/16 | 0.33 | 0.06 | 0.38 | 0.25 | 0.88 | 0.19 | 0.60 | 0.56 | 0.98 | 1.47 | 0.16 | 1.14 | 0.19 |
| 1/4 | 0.5 | 0.10 | 0.47 | 0.31 | 1.13 | 0.25 | 0.78 | 0.62 | 1.28 | 1.84 | 0.19 | 1.43 | 0.25 |
| 5/16 | 0.75 | 0.18 | 0.53 | 0.38 | 1.21 | 0.31 | 0.84 | 0.75 | 1.46 | 2.09 | 0.22 | 1.71 | 0.31 |
| 3/8 | 1 | 0.31 | 0.66 | 0.44 | 1.45 | 0.38 | 1.03 | 0.92 | 1.79 | 2.50 | 0.25 | 2.06 | 0.38 |
| 7/16 | 1.5 | 0.38 | 0.75 | 0.50 | 1.69 | 0.44 | 1.16 | 1.06 | 2.04 | 2.91 | 0.31 | 2.37 | 0.44 |
| 1/2 | 2 | 0.72 | 0.81 | 0.62 | 1.88 | 0.50 | 1.31 | 1.18 | 2.31 | 3.28 | 0.38 | 2.69 | 0.50 |
| 5/8 | 3.25 | 1.37 | 1.06 | 0.75 | 2.38 | 0.62 | 1.69 | 1.50 | 2.93 | 4.19 | 0.44 | 3.34 | 0.69 |
| 3/4 | 4.75 | 2.35 | 1.25 | 0.88 | 2.81 | 0.75 | 2.00 | 1.81 | 3.50 | 4.97 | 0.50 | 3.97 | 0.81 |
| 7/8 | 6.5 | 3.62 | 1.44 | 1.00 | 3.31 | 0.88 | 2.28 | 2.10 | 4.04 | 5.83 | 0.50 | 4.50 | 0.97 |
| 1 | 8.5 | 5.03 | 1.69 | 1.12 | 3.76 | 1.00 | 2.69 | 2.38 | 4.69 | 6.56 | 0.56 | 5.13 | 1.06 |
| 1-1/8 | 9.5 | 7.41 | 1.81 | 1.25 | 4.27 | 1.16 | 2.91 | 2.68 | 5.15 | 7.47 | 0.63 | 5.97 | 1.25 |
| 1-1/4 | 12 | 9.50 | 2.03 | 1.38 | 4.69 | 1.29 | 3.26 | 3.00 | 5.76 | 8.26 | 0.69 | 6.50 | 1.38 |
| 1-3/8 | 13.5 | 13.53 | 2.25 | 1.53 | 5.22 | 1.42 | 3.62 | 3.31 | 6.38 | 9.16 | 0.75 | 6.93 | 1.50 |
| 1-1/2 | 17 | 17.20 | 2.38 | 1.63 | 5.76 | 1.53 | 3.88 | 3.62 | 6.94 | 10.00 | 0.81 | 7.43 | 1.62 |
| 1-3/4 | 25 | 27.78 | 2.88 | 2.00 | 7.00 | 1.84 | 5.00 | 4.19 | 8.80 | 12.34 | 1.00 | 9.19 | 2.25 |
| 2 | 35 | 45.00 | 3.25 | 2.25 | 7.75 | 2.08 | 5.75 | 4.81 | 10.15 | 13.68 | 1.13 | 10.36 | 2.40 |
| 2-1/2 | 55 | 85.75 | 4.12 | 2.75 | 10.51 | 2.72 | 7.25 | 5.81 | 12.75 | 17.92 | 1.38 | 13.17 | 3.13 |
Design Factor 6:1. Maximum Proof Load = 2× WLL. For side-loading reductions and application limits, see manufacturer warnings. Meets ASME B30.26. Operating range −40°F to 400°F.
Specifications
Attachments
Related Items
Related Products
Crosby
Crosby 1/2" G-209 Screw Pin Anchor Shackle - 2 Ton WLL - #1018455
Crosby
Crosby 1-1/4" G-209 Screw Pin Anchor Shackle - 12 Ton WLL - #1018570
Crosby
Crosby 1" G-209 Screw Pin Anchor Shackle - 8-1/2 Ton WLL - #1018534
Crosby
Crosby 1-1/2" G-209 Screw Pin Anchor Shackle - 17 Ton WLL - #1018614
Crosby
Crosby 2-1/2" G-209 Screw Pin Anchor Shackle - 55 Ton WLL - #1018678
Crosby
Crosby 1-3/4" G-209 Screw Pin Anchor Shackle - 25 Ton WLL - #1018632
Crosby
Crosby 2" G-209 Screw Pin Anchor Shackle - 35 Ton WLL - #1018650
Crosby
Crosby 7/16" G-209 Screw Pin Anchor Shackle - 1-1/2 Ton WLL - #1018437
Crosby
Crosby 3/8" G-209 Screw Pin Anchor Shackle - 1 Ton WLL - #1018419
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.