ARI
ARI Bee Bopper Wasp & Hornet Spray - 14 oz
Made in the United States of America!
This product usually ships out in just 1 - 2 days.
Earn rewards points.
CA Prop 65
Product Description
For Control of Nests of Wasps, Yellow Jackets and Hornets
The best time to spray the nest is in the early morning or early evening when the air temperature is cooler, most insects are in the nest, and little activity is observed around the nest opening. Spray only if the air is still. Stand at a safe distance from the nest. Do not stand directly under the nest. Hold container upright at arm's length and point the actuator at the nest. First spray the opening of the nest. Then spray the rest of the nest until it is saturated. Treated insects may fall out of the nest and die. Any insects returning to the nest after treatment will be killed. Wait 48 hours before removing the nest. Hose off foliage of desirable plants contacted with spray.
- Shoots a stream 20 feet
- Can be used both indoors (attics and other places where nests are built and where food or feed are not exposed) and outdoors on Wasp, Hornet, and Yellow Jacket nests
- Dielectric Breakdown Voltage: 57.2 KV by ASTM Test Method D-877-87
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
Q&A
Related Products
Sprayon
Sprayon Blast 'Em Wasp & Hornet Killer - 16 oz
CRC
CRC Zinc-It Cold Galvanizing Spray - 16 oz
Weaver
Weaver 14 oz Blaze Orange Cordura Throw Weight
CRC
CRC Wire Rope & Chain Spray Lubricant - 16 oz
WD-40
WD-40 Spray Lubricant w/ Smart Straw - 8 oz
Yale Cordage