Product Description
The Ultimate New Product in Load Securement!
Torque drive binders use a portable power drill to secure loads and eliminate the need for repetitive, manual operations common with lever and ratchet binders.SpeedBinders save time ratcheting down and releasing loads. Time saved means more profit!
Extreme edge gear box placement makes this the most versatile binder that SpeedBinders has produced. Grease zerk is standard equipment. You also receive a protection ring for long life (customer installed). These are designed to work with 5/16" - 3/8" chain.
They have a skinnier hook and ring which allows for hook placement inside most stake pockets. The ultimate for the landscaper, skid loader, and mini excavator operators. Zinc coated rings, hooks and post threads. 24:1 gear reduced.
Long handle, extreme offset to bring the gear set closer to the operator for easier operation. The handle is a reaction bar. Needs to be in contact with the floor or equipment for proper tension retention.
This latest version is the highest quality yet. Truly the best binder on the market bar none. It gets chains tighter and is safer and faster than anything on the market. Store your end links inside the barrel when storing and they will be out of the road salt/brine and stay lubricated. Heavy/implement grade paint resistant to chipping, zinc coated, sealed gear box.
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.