Product Description
- Ball bearing for shock-free and less friction when rotating and turning.
- Optical markings to determine the load angle and wear occurrence.
- Large working load limit range from 0.3 t – 50 t.
- Higher working load limits possible thanks to optimized attachment / alignment (WLL X / Y / Z).
- Variable bolt lengths available for use in threaded and through bores.
- The VWBG load ring with ball bearing allows vertical rotation under full load.
- Tipping and flipping actions are therefore possible and safe. Even loading 90° (rectangular) to the ring plane is possible.
- This load force occurs, for example, when a plate must be pivot from the vertical into a horizontal position.
- Further advantages are a relatively small contact surface and the larger clearance of the suspension to the bolt-on surface.
- This means that even with a 90° loading, the attached hooks cannot damage the load.
- On the VWBG-V (V = Vario) the threaded part consists of a bolt (ICE-Bolt). This enables a higher WLL and the installation of a bolt of any length with a selectable thread type.
Specifications
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.