Columbus McKinnon
CM 1-3/4" Bolt Type Long Reach Shackle - 25 Ton WLL
Made in the United States of America!
This product is rated for overhead lifting.
This product usually ships out in just 1 - 2 days.
Earn rewards points.
CA Prop 65
Product Description
CM Long Reach Bolt-Type Shackles – Secure, Extended-Length Rigging Solutions
CM Long Reach Bolt-Type Shackles offer added reach and secure fastening for critical rigging points that are recessed or otherwise difficult to access. Designed for long-term or high-vibration applications, the bolt, nut, and cotter configuration delivers secure performance in construction, infrastructure, and industrial environments. These shackles are forged from alloy steel, finished in a durable orange powder coat, and proudly made in the USA.
The bolt features a hex head for easy installation with standard tools, and each shackle is clearly marked with its working load limit. Sizes range from 5/8" to 1-3/4", with WLLs from 7,000 to 50,000 lbs. Compliant with ASME B30.26 standards and built with a 5:1 design factor, these shackles are ready for overhead lifting—provided they are properly loaded across the pin and not used in side-loading configurations.
Key Features
- Extended Body: Designed for reaching recessed lifting points
- Hex Head Bolt: Allows installation with common hand tools
- Secure Connection: Bolt, nut, and cotter pin resist accidental loosening
- High-Visibility Finish: Orange powder coat provides corrosion resistance
- Clear Identification: WLL is permanently forged into the shackle body
- Meets Standards: ASME B30.26 compliant with 5:1 design factor
- Made in the USA: Quality craftsmanship for industrial applications
Specifications
- Size Range: 5/8" to 1-3/4"
- Working Load Limit: 7,000 to 50,000 lbs
- Material: Forged alloy steel
- Style: Bolt, nut & cotter with hex head bolt
Specifications
Attachments
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
Q&A
Want to know more? Check out these videos!
Related Products
Columbus McKinnon
CM 3/4" Bolt Type Long Reach Shackle - 5 Ton WLL
Columbus McKinnon
CM 1-1/4" Bolt Type Long Reach Shackle - 14 Ton WLL
Columbus McKinnon
CM 1-3/4" Screw Pin Long Reach Shackle - 25 Ton WLL
Columbus McKinnon
CM 1" Bolt Type Long Reach Shackle - 9-1/2 Ton WLL
Columbus McKinnon
CM 1-1/2" Bolt Type Long Reach Shackle - 17 Ton WLL
Columbus McKinnon
CM 5/8" Bolt Type Long Reach Shackle - 3-1/2 Ton WLL
Columbus McKinnon
CM 1/4" Bolt Type Anchor Shackle - 3/4 Ton WLL
Columbus McKinnon
CM 3/4" Screw Pin Long Reach Shackle - 5 Ton WLL
Columbus McKinnon