Columbus McKinnon
CM 5/8" Screw Pin Long Reach Shackle - 3-1/2 Ton WLL
Made in the United States of America!
This product is rated for overhead lifting.
This product usually ships out in just 1 - 2 days.
Earn rewards points.
CA Prop 65
Product Description
CM Long Reach Screw Pin Shackles – Extra Clearance for Hard-to-Reach Lifts
CM Long Reach Screw Pin Shackles are built for rigging scenarios where a standard shackle won’t reach. Their extended body is ideal for connecting to recessed or obstructed pick points—commonly found in construction, precast concrete work, and steel erection. Made from forged alloy steel and finished in CM’s signature orange powder coat, these shackles are manufactured in the USA for professional-grade reliability.
The screw pin design features a hex head for easy installation with hand tools, offering quick setup and removal on frequently adjusted rigging points. Available in sizes from 5/8" to 1-3/4", with working load limits ranging from 7,000 to 50,000 lbs, these shackles are clearly marked with their WLL and meet ASME B30.26 requirements with a 5:1 design factor. For proper use, loads must be evenly distributed across the pin—no side or point loading.
Key Features
- Extended Reach: Ideal for recessed or difficult pick points
- Hex Head Screw Pin: Allows easy tightening with a wrench or socket
- Quick Setup: Screw pin style enables fast rigging changes
- High-Visibility Finish: Durable orange powder coat resists wear and corrosion
- Clearly Marked: WLL forged into the body for easy identification
- Compliant Design: Meets ASME B30.26 with 5:1 design factor
- Made in the USA: Trusted domestic quality and performance
Specifications
- Size Range: 5/8" to 1-3/4"
- Working Load Limit: 7,000 to 50,000 lbs
- Material: Forged alloy steel
- Style: Screw pin with hex head
Specifications
Attachments
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
Q&A
Want to know more? Check out these videos!
Related Products
Columbus McKinnon
CM 3/4" Screw Pin Long Reach Shackle - 5 Ton WLL
Columbus McKinnon
CM 1" Screw Pin Long Reach Shackle - 9-1/2 Ton WLL
Columbus McKinnon
CM 1-1/2" Screw Pin Long Reach Shackle - 17 Ton WLL
Columbus McKinnon
CM 1-3/4" Screw Pin Long Reach Shackle - 25 Ton WLL
Columbus McKinnon
CM 1-1/4" Screw Pin Long Reach Shackle - 14 Ton WLL
Columbus McKinnon
CM 5/8" Bolt Type Long Reach Shackle - 3-1/2 Ton WLL
Columbus McKinnon
CM 3/8" Screw Pin Anchor Shackle - 1-1/2 Ton WLL
Columbus McKinnon
CM 5/8" Screw Pin Anchor Shackle - 4-1/2 Ton WLL
Columbus McKinnon