Product Description
17S-0.4-50" Adjustable Lifting Beam
- Capacity: 600 lbs plus weight of tongs
- Beam for PC4 assembly line which lifts box ranges from 24x36 to 30x60. Weight range between 190-600 lbs
- Single lifting bail with 3" x 5" hook opening
- Overall beam length: 54"
- Spreads adjustable between 46"-73" in 1.25" increments prior to lift
- Includes (2) bottom shackles/oblong
- Unit weight: TBD
- Headroom: TBD
- Painted Caldwell yellow and labeled to compliance
- Meets ASME B30.20 BTH-1 design standards; design category "B", service class "2".
- Approval drawing required, cancellation fees may apply, item is non-returnable.
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.