Product Description
ABSORBICA-I is a single lanyard with compact energy absorber designed for progression on a horizontal lifeline (rope or cable) or on an elevated platform, without passing intermediate anchors. It has several installation options on the harness and can be used with different types of connectors. It is available in two lengths: 80 or 150 cm versions (without connectors). The 150 cm version has an elasticized arm, to avoid hindering progression. Depending on the connectors used, ABSORBICA-I is certified to American, European and Russian standards.
- Designed for progression on a horizontal lifeline (rope or cable) or on an elevated platform, without passing intermediate anchors
- Absorbs energy in case of a fall--tearing of the energy absorber webbing limits the impact force on the user, progressive tearing reduces the deceleration on lightweight users
- Works with users who weigh between 50 and 130 kg (110 and 286 lbs)
- Minimal bulk: compact energy absorber facilitates handling
- Durable fabric pouch with opening system at each end, protects the energy absorber from abrasion or contaminants while allowing for regular inspection of the absorber
- Two connector options for the end of the lanyard: a locking carabiner, or MGO OPEN connector with large gate opening
- Certification(s): CE EN 355 when used with EN 362 connectors, ANSI Z359.13 12 feet when used with ANSI Z359.12 connectors, EAC
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.