Product Description
The PIXA 2 is a rugged headlamp offering lighting that allows the user to work comfortably on tasks close at hand or to move around safely. CONSTANT LIGHTING technology: brightness does not decrease gradually as the batteries are drained. It meets HAZLOC Class I Div 2 and Class II Div 2 certification requirements for work in explosive environments. 80 lumens.
- Headlamp keeps hands free for work and can be:
- worn on the head with the headband
- attached to the helmet with a mounting plate (included)
- placed on the ground
- CONSTANT LIGHTING technology ensures brightness that does not gradually decrease as the battery drains
- Several lighting modes adapt to each situation:
- low-intensity mode adapted to close-range work: mixed beam with a wide, uniform flood
- high-intensity mode adapted to movement: mixed beam with focused component allows user to move around comfortably
- Lighting for professionals that is reliable, practical and durable:
- automatically switches to reserve mode when batteries are almost drained (signaled by blinking light)
- knob is easy to use, even with gloves on
- storage position helps protect the headlamp lens and prevents inadvertently turning it on
- may be used in explosive environments (ATEX: zone 2/22)
- excellent resistance to falls (2 m), impacts, and crushing (80 kg)
- comfortable and washable elastic headband
- resistant to chemicals (see www.petzl.com/PIXA)
- Available in ATEX or HAZLOC versions
Additional Information- Technology: CONSTANT LIGHTING
- Beam pattern: mixed
- Energy: 2 AA/LR06 batteries (included)
- Battery compatibility: rechargeable Ni-MH and lithium
- Watertightness: IP 67 (waterproof to -1 meter for 30 minutes, no maintenance required after immersion)
Safety Notice
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
