Westechrigging.com is now Lifting.com Learn More
Secure transaction |
Maybe you've heard about a rope that's replacing wire rope for winch lines--this is it! This rope is made from HMPE (High Modulus PolyEthylene) that is stronger than wire rope (aka steel cable) size-for-size. To be clear--if you pull this rope against a steel winch line of the same diameter, you will break the steel winch line first! It has many other great benefits too, such as being flexible, easily spliced, repairable in the field and even floating on water. You can even use this rope in freezing conditions!
Around here, in the Pacific Northwest, many call this "logging rope" because so many loggers have used it to make extensions, or even as a drum line (aka winch line). Looking to buy the rope by itself? Check it out at this link. We offer it online in diameters from 1/4" thru 1-1/2" but we can get even larger diameters if needed. And please, stack this rope up against the competition and you'll see how well it specs out. Be sure to compare the minimum breaking strength!
We have one local customer that retrieves off-road vehicles for a living. They have put this rope to the test time and time again, expecting it to fail. Guess what! It hasn't! They have had a few straps (yes, we can splice straps for you too) in service for years, and they're still performing well. You won't be disappointed!
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.