Crosby IP Crosby IP IPU10H 2 Ton Lifting Clamp - #2702165 MSRP: $2,637.00 Add to Cart Compare Crosby IP Crosby IP IPU10 2 Ton Lifting Clamp - #2701677 MSRP: $1,517.00 Add to Cart Compare Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 MSRP: $2,939.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 2 Ton Lifting Clamp - #2702165 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,637.00 Add to Cart Compare Crosby IP Crosby IP IPU10 2 Ton Lifting Clamp - #2701677 For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loadingWelded alloy steel body for strength... MSRP: $1,517.00 Add to Cart Compare Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 For the transfer of steel beams and attachments of tackle eyeWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2... MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more, special pads prevent surface damageWelded alloy steel body for strength and a small frame sizeForged... MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPU10 2 Ton Lifting Clamp - #2701677 MSRP: $1,517.00 Add to Cart Compare Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 MSRP: $2,939.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 2 Ton Lifting Clamp - #2702165 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,637.00 Add to Cart Compare Crosby IP Crosby IP IPU10 2 Ton Lifting Clamp - #2701677 For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loadingWelded alloy steel body for strength... MSRP: $1,517.00 Add to Cart Compare Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 For the transfer of steel beams and attachments of tackle eyeWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2... MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more, special pads prevent surface damageWelded alloy steel body for strength and a small frame sizeForged... MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 MSRP: $2,939.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 2 Ton Lifting Clamp - #2702165 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,637.00 Add to Cart Compare Crosby IP Crosby IP IPU10 2 Ton Lifting Clamp - #2701677 For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loadingWelded alloy steel body for strength... MSRP: $1,517.00 Add to Cart Compare Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 For the transfer of steel beams and attachments of tackle eyeWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2... MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more, special pads prevent surface damageWelded alloy steel body for strength and a small frame sizeForged... MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 MSRP: $2,939.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 2 Ton Lifting Clamp - #2702165 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,637.00 Add to Cart Compare Crosby IP Crosby IP IPU10 2 Ton Lifting Clamp - #2701677 For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loadingWelded alloy steel body for strength... MSRP: $1,517.00 Add to Cart Compare Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 For the transfer of steel beams and attachments of tackle eyeWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2... MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more, special pads prevent surface damageWelded alloy steel body for strength and a small frame sizeForged... MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 MSRP: $2,939.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 2 Ton Lifting Clamp - #2702165 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,637.00 Add to Cart Compare Crosby IP Crosby IP IPU10 2 Ton Lifting Clamp - #2701677 For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loadingWelded alloy steel body for strength... MSRP: $1,517.00 Add to Cart Compare Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 For the transfer of steel beams and attachments of tackle eyeWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2... MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more, special pads prevent surface damageWelded alloy steel body for strength and a small frame sizeForged... MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 MSRP: $2,939.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 2 Ton Lifting Clamp - #2702165 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,637.00 Add to Cart Compare Crosby IP Crosby IP IPU10 2 Ton Lifting Clamp - #2701677 For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loadingWelded alloy steel body for strength... MSRP: $1,517.00 Add to Cart Compare Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 For the transfer of steel beams and attachments of tackle eyeWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2... MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more, special pads prevent surface damageWelded alloy steel body for strength and a small frame sizeForged... MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 MSRP: $2,939.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 2 Ton Lifting Clamp - #2702165 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,637.00 Add to Cart Compare Crosby IP Crosby IP IPU10 2 Ton Lifting Clamp - #2701677 For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loadingWelded alloy steel body for strength... MSRP: $1,517.00 Add to Cart Compare Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 For the transfer of steel beams and attachments of tackle eyeWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2... MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more, special pads prevent surface damageWelded alloy steel body for strength and a small frame sizeForged... MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 MSRP: $2,939.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 2 Ton Lifting Clamp - #2702165 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,637.00 Add to Cart Compare Crosby IP Crosby IP IPU10 2 Ton Lifting Clamp - #2701677 For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loadingWelded alloy steel body for strength... MSRP: $1,517.00 Add to Cart Compare Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 For the transfer of steel beams and attachments of tackle eyeWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2... MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more, special pads prevent surface damageWelded alloy steel body for strength and a small frame sizeForged... MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 MSRP: $2,939.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 2 Ton Lifting Clamp - #2702165 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,637.00 Add to Cart Compare Crosby IP Crosby IP IPU10 2 Ton Lifting Clamp - #2701677 For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loadingWelded alloy steel body for strength... MSRP: $1,517.00 Add to Cart Compare Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 For the transfer of steel beams and attachments of tackle eyeWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2... MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more, special pads prevent surface damageWelded alloy steel body for strength and a small frame sizeForged... MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 MSRP: $2,939.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 2 Ton Lifting Clamp - #2702165 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,637.00 Add to Cart Compare Crosby IP Crosby IP IPU10 2 Ton Lifting Clamp - #2701677 For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loadingWelded alloy steel body for strength... MSRP: $1,517.00 Add to Cart Compare Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 For the transfer of steel beams and attachments of tackle eyeWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2... MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more, special pads prevent surface damageWelded alloy steel body for strength and a small frame sizeForged... MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 MSRP: $2,939.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 2 Ton Lifting Clamp - #2702165 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,637.00 Add to Cart Compare Crosby IP Crosby IP IPU10 2 Ton Lifting Clamp - #2701677 For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loadingWelded alloy steel body for strength... MSRP: $1,517.00 Add to Cart Compare Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 For the transfer of steel beams and attachments of tackle eyeWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2... MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more, special pads prevent surface damageWelded alloy steel body for strength and a small frame sizeForged... MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 MSRP: $2,939.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 2 Ton Lifting Clamp - #2702165 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,637.00 Add to Cart Compare Crosby IP Crosby IP IPU10 2 Ton Lifting Clamp - #2701677 For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loadingWelded alloy steel body for strength... MSRP: $1,517.00 Add to Cart Compare Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 For the transfer of steel beams and attachments of tackle eyeWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2... MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more, special pads prevent surface damageWelded alloy steel body for strength and a small frame sizeForged... MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPU10H 2 Ton Lifting Clamp - #2702165 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,637.00 Add to Cart Compare Crosby IP Crosby IP IPU10 2 Ton Lifting Clamp - #2701677 For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loadingWelded alloy steel body for strength... MSRP: $1,517.00 Add to Cart Compare Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 For the transfer of steel beams and attachments of tackle eyeWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2... MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more, special pads prevent surface damageWelded alloy steel body for strength and a small frame sizeForged... MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPU10 2 Ton Lifting Clamp - #2701677 For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loadingWelded alloy steel body for strength... MSRP: $1,517.00 Add to Cart Compare Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 For the transfer of steel beams and attachments of tackle eyeWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2... MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more, special pads prevent surface damageWelded alloy steel body for strength and a small frame sizeForged... MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPTK 4 Ton Beam Clamp - #2700998 For the transfer of steel beams and attachments of tackle eyeWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2... MSRP: $1,064.00 Add to Cart Compare Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more, special pads prevent surface damageWelded alloy steel body for strength and a small frame sizeForged... MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPHNM10 2 Ton Non-Marring Horizontal Lifting Clamp - #2703290 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more, special pads prevent surface damageWelded alloy steel body for strength and a small frame sizeForged... MSRP: $1,893.00 Add to Cart Compare Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPH10 2 Ton Horizontal Lifting Clamp - #2703522 For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)Welded alloy steel body for strength and a small frame size, with forged... MSRP: $1,405.00 Add to Cart Compare Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IP10 2 Ton Lifting Clamp - #2701676 For vertical lifting, turning and transferWelded alloy steel body for strength and a small frame sizeForged alloy components where it matters mostIndividually proof-tested at 2 times the Working Load... MSRP: $1,289.00 Add to Cart Compare Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPNM10 2 Ton Non-Marring Lifting Clamp - #2703442 Designed to be used in place of traditional lifting clamps when, during the lift or transfer, no damage to the material is permittedWill NOT mar or scratch the material surfaceCommonly used on... MSRP: $6,907.00 Add to Cart Compare Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP M1677 IP10 / IPU10 2 Ton Repair Kit - #2715063 THIS IS NOT THE PROPER KIT FOR HARDENED IPU10H OR STAINLESS IUP10S CLAMPS MSRP: $452.00 Add to Cart Compare Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPBK10 4 Ton Lifting Clamp - #2703839 The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in... MSRP: $1,785.00 Add to Cart Compare Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPBHZ 4-1/2 Ton Horizontal Lifting Clamp - #2705464 The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This... MSRP: $2,259.00 Add to Cart Compare Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected × OK
Crosby IP Crosby IP IPU10S 3 Ton Lifting Clamp - #2702265 Designed specifically for handling stainless steel, to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and... MSRP: $2,480.00 Add to Cart Compare Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected
Crosby IP Crosby IP IPU10H 3 Ton Lifting Clamp - #2702167 Designed specifically for handling very hard materials (surface hardness up to 47Rc - 450HB), to be used for vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp... MSRP: $2,939.00 Add to Cart Compare Previous 1 2 3 4 5 6 7 8 9 Next Previous 1 2 3 4 5 6 7 8 9 Next Compare Selected
